Stainless Steel Double Deck Overshelf - 12" x 60"

Very cheaply and poorly made. Prepair to do a lot of work on it to make it usuable. Set screws for shelves have aboit 1.5 threads so you cant tighten real tight or they will strip. But they need to be tight to hold any weight. One of the tubes on the bottom shelf had a tack weld that wouldnt allow the bar to pass through. Had to grind it down. Then hammer the bars through the shelf. The other side was super loos. Ended up getting stainless bits and screws and eliminatind their set screws with that. A lot of measuring and drilling in stainless pipe. Luckily shelves are thon stainless so drilling was hard for actual shelves. Will not hold much weight as is. Have to admit it did look good sitting on top of our new 60" sandwich prep cooler but the 1/2" bars made it look cheap. Plus there were no measurements or markings on where to put the bottom shelf. With it having slop in it, it took a lot of measuring to get it to look and be level.

I bought the 70 3/8” wide, 18” deep overshelf. Like another reviewer mentioned, the support poles are only 1/2”, not 3/4”, and the whole unit feels weak. For something that costs, the quality is really disappointing. Even the shelf itself doesn’t feel very sturdy. On top of that, the screws don’t go in easily at all, which made assembly frustrating and just added to the feeling of poor workmanship. The pole size also isn’t clearly listed in the specs, which feels misleading since it affects how solid the unit is. Had I known this upfront, I wouldn’t have purchased it. Overall, really bad quality and not something I’d recommend for a commercial kitchen.

Very bad experience i agree with one of the customers experiences about quality of the product is not worth it very sad. screw can get in and the holes are Not make right. Screw won’t go through the hole.